HBLC CO2 Level controller
HBLC is an intelligent sensor with a built-in microprocessor. It is designed to control refrigerant levels in both low pressure and high pressure systems. It emits a 4-20 mA signal, which is proportional to the sensor's set range of measurement.
Apart from the 4-20 mA signal, the sensor also has a built-in controller. The controller can be set-up with all the parameters necessary for controlling a modulating motor valve or stepper motor. The sensor can be delivered with a cable for direct supply to and control of motor valve or stepper motor valve.
Product features:
 |
Stand alone solution together with modulating valve. Flexible and cost effective alternative to float switches. |
|
Simple installation and configurering with PC. The regulation loop, timer and alarm are all programmable. |
|
LED indication of power supply, alarm and regualtion status. Further an alarm status can be given to central panel. |
|
Split design which make it possible to make easy installation and diagnostic. The electronic part can be easily disconnected by 2 screws. |
|
The sensor can control modulating valve, pilot valve or stepper motor valve. |
| Power supply | |
|---|---|
| Voltage | 24 V AC/DC + 10% |
| Current consumption | Max 30 mA |
| Electronic connection | M12, 5 pins |
| Cable length | 3 m (118″) |
| Cable size | 3 x 0,75 mm2 |
| Direct valve control | |
| Signal to modulation valve | 4-20 mA |
| Stepper motor control | |
| Stepper motor steps | 25-5000 steps |
| Stepper motor spedd in m/s | 2-40 m/s |
| Home recal. Time in hours | 0-255 hours |
| Stepper motor phase cureent | 0-750 mA |
| Stepper motor holding current | 0-250 mA |
| Environmental conditions | |
| Ambient temperature | -30…+50°C |
| Refrigerant temperature | -60…+80°C |
| Max operating pressure | 100 bar |
| Degree of protection | IP65 |
| Vibrations | IEC 68-2-6 (4g) |
| Mechanical specifications | |
| Mechanical connection | 3/4″ |
| Material liquid parts | AISI 304 / PTFE |
| Material (electronics) | GF BLK, Nylon 6 (PA) |
| Size | Length x 51×72 mm |
| Weight | Depends on length |
| Type | Front housing |
| Configurations | |
| Configuration | By PC tool |
| LED indiation | LED (green, yellow and red) |
| Approvals | |
| EMC test | EN 61000-2 |
| Accessories | |
| Modulating valve | MVS 661 |
| Cable | |
| Length | 5 m |
| Material / Size | PUR – 5 x 0,34 mm2 |
| Power supply | |
|---|---|
| Voltage | 24 V AC/DC + 10% |
| Current consumption | Max 30 mA |
| Electronic connection | M12, 5 pins |
| Cable length | 3 m (118″) |
| Cable size | 3 x 0,75 mm2 |
| Direct valve control | |
| Signal to modulation valve | 4-20 mA |
| Stepper motor control | |
| Stepper motor steps | 25-5000 steps |
| Stepper motor spedd in m/s | 2-40 m/s |
| Home recal. Time in hours | 0-255 hours |
| Stepper motor phase cureent | 0-750 mA |
| Stepper motor holding current | 0-250 mA |
| Environmental conditions | |
| Ambient temperature | -30…+50°C |
| Refrigerant temperature | -60…+80°C |
| Max operating pressure | 100 bar |
| Degree of protection | IP65 |
| Vibrations | IEC 68-2-6 (4g) |
| Mechanical specifications | |
| Mechanical connection | 3/4″ |
| Material liquid parts | AISI 304 / PTFE |
| Material (electronics) | GF BLK, Nylon 6 (PA) |
| Size | Length x 51×72 mm |
| Weight | Depends on length |
| Type | Front housing |
| Configurations | |
| Configuration | By PC tool |
| LED indiation | LED (green, yellow and red) |
| Approvals | |
| EMC test | EN 61000-2 |
| Accessories | |
| Modulating valve | MVS 661 |
| Cable | |
| Length | 5 m |
| Material / Size | PUR – 5 x 0,34 mm2 |
| Power supply | |
|---|---|
| Voltage | 24 V AC/DC + 10% |
| Current consumption | Max 30 mA |
| Electronic connection | M12, 5 pins |
| Cable length | 3 m (118″) |
| Cable size | 3 x 0,75 mm2 |
| Direct valve control | |
| Signal to modulation valve | 4-20 mA |
| Stepper motor control | |
| Stepper motor steps | 25-5000 steps |
| Stepper motor spedd in m/s | 2-40 m/s |
| Home recal. Time in hours | 0-255 hours |
| Stepper motor phase cureent | 0-750 mA |
| Stepper motor holding current | 0-250 mA |
| Environmental conditions | |
| Ambient temperature | -30…+50°C |
| Refrigerant temperature | -60…+80°C |
| Max operating pressure | 100 bar |
| Degree of protection | IP65 |
| Vibrations | IEC 68-2-6 (4g) |
| Mechanical specifications | |
| Mechanical connection | 3/4″ |
| Material liquid parts | AISI 304 / PTFE |
| Material (electronics) | GF BLK, Nylon 6 (PA) |
| Size | Length x 51×72 mm |
| Weight | Depends on length |
| Type | Front housing |
| Configurations | |
| Configuration | By PC tool |
| LED indiation | LED (green, yellow and red) |
| Approvals | |
| EMC test | EN 61000-2 |
| Accessories | |
| Modulating valve | MVS 661 |
| Cable | |
| Length | 5 m |
| Material / Size | PUR – 5 x 0,34 mm2 |
Inquiry
Niezwłocznie po wpłynięciu do nas zapytania zostanie przygotowana dla Państwa oferta wraz ze szczegółową wyceną.