HBCP HFC Compressor protection
HBCP is a new revolutionary, patent-pending sensor technology and it is the first sensor in the world capable of measuring the condition of gas and liquid refrigerant in a refrigeration system. HBCP is used for detecting gas quality at the intake found on refrigeration compressors. The sensors thereby ensure that liquid refrigerant does not enter the compressor, causing damage to the moving parts.
The sensor has a high sensitivity and even detects small liquid droplets before they become critical to the compressor. The sensor has a uniquely low reaction time, and thereby ensures that the compressor is not damaged. In the event of liquid hammer, an instantaneous alarm is sent to the compressor control, which must signal an emergency stop to the compressor. The sensor measures the total gas and liquid capacity, which is displayed in pF.
Product features:
The sensor protects the compressor against damage in the event of liquid hammer from the system. | |
Setting up the sensor using a PC allows for adjustments to match the system and the compressor. | |
Instantaneous reaction without delays. |
Power supply | |
---|---|
Voltage | 24 V DC + 10% |
Power usage | Max 30 mA |
Plug connection | M12, 5 pins |
Output | |
Transsistor PNP | NO or NC (programmable) |
Alarm indication for gas/liquid condition | Warning / Alarm |
Environmental conditions | |
Ambient temperature | -30°C…+50°C |
Refrigerant temperature | -60°C…+80°C |
Max. pressure | 100 bar |
Waterproof rating | IP65 |
Vibrations | IEC 68-2-6 (4g) |
Mechanical specifications | |
Thread connection | 3/4” NPT and 1″ BSPP |
Material of the parts coming into contact with liquid | AISI 304 |
Material of the electronic parts | GF BLK, Nylon 6 (PA) |
Output | See drawing |
Type | Front housing |
Approvals | |
EMC test | EN 61000-2 |
Cable | |
5m cable with M12 plug | HBxC-M12/5 |
Cable specifications | PUR -5 x 0,34mm2 |
Indication | |
LED Indication | LED (green, yellow, and red) |
Configurations | |
Configuration | With the PC tool |
Power supply | |
---|---|
Voltage | 24 V DC + 10% |
Power usage | Max 30 mA |
Plug connection | M12, 5 pins |
Output | |
Transsistor PNP | NO or NC (programmable) |
Alarm indication for gas/liquid condition | Warning / Alarm |
Environmental conditions | |
Ambient temperature | -30°C…+50°C |
Refrigerant temperature | -60°C…+80°C |
Max. pressure | 100 bar |
Waterproof rating | IP65 |
Vibrations | IEC 68-2-6 (4g) |
Mechanical specifications | |
Thread connection | 3/4” NPT and 1″ BSPP |
Material of the parts coming into contact with liquid | AISI 304 |
Material of the electronic parts | GF BLK, Nylon 6 (PA) |
Output | See drawing |
Type | Front housing |
Approvals | |
EMC test | EN 61000-2 |
Cable | |
5m cable with M12 plug | HBxC-M12/5 |
Cable specifications | PUR -5 x 0,34mm2 |
Indication | |
LED Indication | LED (green, yellow, and red) |
Configurations | |
Configuration | With the PC tool |
Power supply | |
---|---|
Voltage | 24 V DC + 10% |
Power usage | Max 30 mA |
Plug connection | M12, 5 pins |
Output | |
Transsistor PNP | NO or NC (programmable) |
Alarm indication for gas/liquid condition | Warning / Alarm |
Environmental conditions | |
Ambient temperature | -30°C…+50°C |
Refrigerant temperature | -60°C…+80°C |
Max. pressure | 100 bar |
Waterproof rating | IP65 |
Vibrations | IEC 68-2-6 (4g) |
Mechanical specifications | |
Thread connection | 3/4” NPT and 1″ BSPP |
Material of the parts coming into contact with liquid | AISI 304 |
Material of the electronic parts | GF BLK, Nylon 6 (PA) |
Output | See drawing |
Type | Front housing |
Approvals | |
EMC test | EN 61000-2 |
Cable | |
5m cable with M12 plug | HBxC-M12/5 |
Cable specifications | PUR -5 x 0,34mm2 |
Indication | |
LED Indication | LED (green, yellow, and red) |
Configurations | |
Configuration | With the PC tool |
Inquiry
Niezwłocznie po wpłynięciu do nas zapytania zostanie przygotowana dla Państwa oferta wraz ze szczegółową wyceną.