HFC - sensors and controls

HBCP is a new revolutionary, patent-pending sensor technology and it is the first sensor in the world capable of measuring the condition of gas and liquid refrigerant in a refrigeration system. HBCP is used for detecting gas quality at the intake found on refrigeration compressors. The sensors thereby ensure that liquid refrigerant does not enter the compressor, causing damage to the moving parts.

HBLC is an intelligent sensor with a built-in microprocessor. It is designed to control refrigerant levels in both low pressure and high pressure systems. It emits a 4-20 mA signal, which is proportional to the sensor's set range of measurement.

HBPS is a pressure sensor that is specially developed for the refrigeration industry. The sensor has a stainless membrane, and the housing is also made of stainless steel. It has a quick reaction time of < 1 s, and it is accessible in 3 pressure ranges of 0...6 bar, -1...25 bar and -1...200 bar.

The Cable Temperature Sensors are used as signal sensors for electronic thermostats, regulators and thermometers.

HBTS is a temperature sensor in accordance with DIN 60751, and it is available in two variants, PT100 and PT1000 – DIN B – class 3. The sensor is designed for the refrigeration industry where servicing of the electronics can be carried out without emptying the system of refrigerant. The sensor is delivered with a 60 & 90 mm sensor element length and a 6 mm sensor diameter.

The sensor is designed for the refrigeration industry where servicing of the electronics can be carried out without emptying refrigerant from the system.

HBSR-HFC-SSR is a level switch for the detection of HFC refrigerants. Typically it is installed in/on the refrigerant vessels, pump separators, economisers or heat exchanger. The sensor is specially built to resist high pressure and low temperatures.
The sensor has universal power supply 90...240 V AC - 50/60 Hz.

HBSR-HFC-SSR-1/IP is a level switch for detecting liquid in refrigeration systems. Typically, it is installed in/on the receiver, but it is also suited for installation in other locations where a level indication is required. The sensor's measurement principle makes it unique for these purposes, since the properties of the measurement principle as well as its special construction allows it to withstand high pressure and low refrigerant temperatures.

HBLT-wire is a capacitive sensor for level measurement of HFC refrigerant in industrial refrigeration systems.

HBLT-flex is a capacitive sensor for level measurement of HFC/HFO/CO2 refrigerant in industrial refrigeration systems.

HBLC-HFC is designed for the measurement of HFC refrigerant level in chillers, evaporators and condensers. The sensor is pre-configured to R134, but can be configured for other HFC types. The sensor detects the refrigerant and transmits the signal to an analog 4-20 mA signal.

HBSR-HFC is a level switch for the detection of common HFC refrigerants. Typically it is installed in/on the refrigerant vessels, pump separators, economisers or heat exchangers. The sensor is built to resist high pressure and low temperatures